In order to get the data of the TDI Matrix, you need make the application log with the key.
The log is done using the USBTrace utility.
The USBTrace utility can be downloaded from the link below.
Then you need to install the USBTrace utility and be sure to register according to the description to the program.
How to get the log:
Remove the key and launch the USBTrace utility in the program menu by clicking the Capture Hot Plugged Devices button and then Start Capture.
After that, insert the key into the port!
The USBTrace interface should begin to be filled with text data:
Then run the program itself.
Filling in the data will continue.
When the program is fully started, it is desirable to work a little in it using its important functions.
Then close the protected program.
In the USBTrace window click the Stop Capture button , thereby stopping the data capture.
After that, in the main menu, select File -> Export Utility -> select the path to save the log
!!! Required in the format of a text document! -> Specify the Text Log (*.txt ) drop-down menu..
Enter the file name for example 1.txt and then press the Export button , thereby saving the log file.
Here is a brief, intuitive instruction on how to use the utility.
After get all data from the key, all should be archived and sent (folder with the dump of the key and the log file taken by the USB Trace program) to firstname.lastname@example.org
And not forget send a link to the protected program.
During the day we will contact you ..
Aladdin Sentinel HASP/SRM + WBAES