NOTE!
All actions must be performed
on Windows XP or Windows 7 32 bit.
Example for a key with passwords 0x2D6A (11626)
In order to
get the dump of the key, it is necessary that the Hardlock
key drivers are installed.
Drivers usually integrate into a distribution with a
secure application and are already available in the system.
Also they can be downloaded here: hldrv32.rar
And also a special program-dumper: hlapi.rar
All utilities are laid out in the
archives with the password: dongla-net.ru
Unzip and install the key drivers, reboot.
To remove a dump from the key, you need to know the
password for accessing the key.
The password of the key can be recognized using the
monitor program hasploger . rar download it and unpack the archive.
In the archive with the logger there is a file vcredist_x86.exe - these are the libraries necessary for its
operation, for correct operation of the logger, they must be
installed.
Then run the haSploGer .exe and then run the protected program.
The Hardlock _ Login window will
appear in the monitor window : ModAd =
0 xXXXX ( XXXXX ) where ( XXXXX ) and there is
a password for your key.
(looks something like this)
Where for example 11626 is the
password to access your key in HEX (0X2D6A)
Write the password for the key in a separate place.
Then run the hlapi.exe utility from the command line like
this: hlapi.exe / dump 11626
Or correct the attached dump.bat - file as follows (you can
fix it in standard notepad) save and run it.
-----------------------------------------------------------------------
@ECHO OFF
hlapi.exe / dump 11626
-----------------------------------------------------------------------
If done correctly, the dumper will create two files 2D6A.dat and
2D6A.reg <- This is the dump of your key
in HEX format.
Everything is archived and sent
to the address support@dongla-net.ru
And not forget send a link to the protected
program.
During the day we will contact you .
Aladdin Sentinel HASP/SRM + WBAES
Feitian Rockey 2/Secure Dongle X
E-mail: support@dongla-net.ru